Pittsburgh Supercomputing Center 

Advancing the state-of-the-art in high-performance computing,
communications and data analytics.

ANSYS standard output and error

Warning: no access to tty (Bad file descriptor).
Thus no job control in this shell.
module: Command not found.
source /usr/share/modules/init/csh
if ( 1 ) then
set modules_shell=tcsh
else
if ( 1 ) then
setenv MODULE_VERSION_STACK 3.1.6
else
set exec_prefix=/usr
if ( 0 ) then
if ( 0 ) then
alias module eval `/usr/bin/modulecmd tcsh !*`
endif
endif
unset exec_prefix
setenv MODULESHOME /usr/share/modules
if ( ! 1 ) then
if ( ! 1 ) then
eval `/usr/bin/modulecmd tcsh load ansys/14.0`
/usr/bin/modulecmd tcsh load ansys/14.0
setenv ANSYSLI_SERVERS This email address is being protected from spambots. You need JavaScript enabled to view it.
 
setenv LD_LIBRARY_PATH /opt/sgi/perfboost/lib:/usr/psc/globus/5.2.2/lib64:/usr/psc/globus/5.2.2/lib:/opt/intel/composer_xe_2013_sp1.0.080/compiler/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/mpirt/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/ipp/../compiler/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/ipp/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/compiler/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/mkl/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/tbb/lib/intel64/gcc4.1:/opt/intel/composer_xe_2013_sp1.0.080/compiler/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/mpirt/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/ipp/../compiler/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/ipp/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/compiler/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/mkl/lib/intel64:/opt/intel/composer_xe_2013_sp1.0.080/tbb/lib/intel64/gcc4.1:/opt/sgi/mpt/mpt-2.04/lib:/opt/intel/composerxe-2011.3.174/mkl/lib/intel64
setenv CFXROOT /usr/local/packages/ansys/14.0/v140/CFX
setenv MANPATH /opt/sgi/man:/usr/local/packages/xsede/xdusage/man:/usr/psc/globus/5.2.2/man:/usr/psc/man:/usr/psc/gnu/man:/usr/local/lustre_utils/default/man:/opt/intel/composer_xe_2013_sp1.0.080/man/en_US:/opt/intel/composer_xe_2013_sp1.0.080/man/en_US:/opt/intel/composer_xe_2013_sp1.0.080/man/en_US:/opt/intel/composer_xe_2013_sp1.0.080/man/en_US:/opt/sgi/mpt/mpt-2.04/man:/usr/local/packages/torque/2.3.13_psc/man:/usr/share/man:/usr/local/man:/opt/man:/usr/share/catman:/usr/catman:/usr/man:/opt/intel/composerxe-2011.3.174/man
setenv PATH /opt/sgi/perfboost/bin:/usr/local/packages/ansys/14.0/v140/autodyn/bin:/usr/local/packages/ansys/14.0/v140/CFX/bin:/usr/local/packages/ansys/14.0/v140/fluent/bin:/usr/local/packages/ansys/14.0/v140/ansys/bin:/usr/local/packages/xsede/xdusage/1.0-r7:/usr/psc/globus/5.2.2/bin:/usr/psc/globus/5.2.2/sbin:/usr/psc/bin:/usr/local/packages/tg/bin:/usr/local/lustre_utils/default/bin:/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64:/opt/intel/composer_xe_2013_sp1.0.080/mpirt/bin/intel64:/opt/intel/composer_xe_2013_sp1.0.080/debugger/gdb/intel64_mic/py26/bin:/opt/intel/composer_xe_2013_sp1.0.080/debugger/gdb/intel64/py26/bin:/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64:/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64_mic:/opt/intel/composer_xe_2013_sp1.0.080/debugger/gui/intel64:/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64:/opt/intel/composer_xe_2013_sp1.0.080/mpirt/bin/intel64:/opt/intel/composer_xe_2013_sp1.0.080/debugger/gdb/intel64_mic/py26/bin:/opt/intel/composer_xe_2013_sp1.0.080/debugger/gdb/intel64/py26/bin:/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64:/opt/intel/composer_xe_2013_sp1.0.080/bin/intel64_mic:/opt/intel/composer_xe_2013_sp1.0.080/debugger/gui/intel64:/opt/sgi/mpt/mpt-2.04/bin:/usr/local/packages/torque/2.3.13_psc/bin:/bin:/usr/bin:/usr/local/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin
setenv FLUENT_HELP /usr/local/packages/ansys/14.0/v140/commonfiles/help
setenv _LMFILES_ /usr/local/opt/modulefiles/torque/2.3.13_psc:/usr/share/modules/modulefiles/mpt/2.04:/usr/local/opt/modulefiles/ifort/14.0.0:/usr/local/opt/modulefiles/icc/14.0.0:/usr/local/opt/modulefiles/imkl/10.3.3:/usr/local/opt/modulefiles/psc_path/1.0:/usr/local/opt/modulefiles/globus/5.2.2:/usr/local/opt/modulefiles/xdusage/1.0-r7:/usr/share/modules/modulefiles/perfboost:/usr/local/opt/modulefiles/ansys/14.0
setenv LOADEDMODULES torque/2.3.13_psc:mpt/2.04:ifort/14.0.0:icc/14.0.0:imkl/10.3.3:psc_path/1.0:globus/5.2.2:xdusage/1.0-r7:perfboost:ansys/14.0
setenv ANSYS140_PRODUCT aa_r
setenv FLUENT_VERSION 14.0
setenv ANS_SEE_RUN_COMMAND 1
cd /brashear/costa
ansys140 -b -m 10000 -db 2000 -mopt incore -np 16
	libansmpi.so => /usr/local/packages/ansys/14.0/v140/ansys/lib/linx64/libansmpi.so (0x00002b257ea57000)
	libansGPU.so => /usr/local/packages/ansys/14.0/v140/ansys/lib/linx64/libansGPU.so (0x00002b617c607000)
Running... /usr/local/packages/ansys/14.0/v140/ansys/bin/linx64/ansys.e140 -i stdin.1800504 -b -m 10000 -db 2000 -mopt incore -np 16
 ANSYS Academic Research                           
 *------------------------------------------------------------------*
 |                                                                  |
 |   W E L C O M E   T O   T H E   A N S Y S (R)  P R O G R A M     |
 |                                                                  |
 *------------------------------------------------------------------*
 ***************************************************************
 *                  ANSYS 14.0 LEGAL NOTICES                   *
 ***************************************************************
 *                                                             *
 * Copyright 2011 SAS IP, Inc.  All rights reserved.           *
 * Unauthorized use, distribution or duplication is            *
 * prohibited.                                                 *
 *                                                             *
 * Ansys is a registered trademark of ANSYS, Inc. or its       *
 * subsidiaries in the United States or other countries.       *
 * See the ANSYS, Inc. online documentation or the ANSYS, Inc. *
 * documentation CD or online help for the complete Legal      *
 * Notice.                                                     *
 *                                                             *
 ***************************************************************
 *                                                             *
 * THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION       *
 * INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY      *
 * PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS.    *
 * The software products and documentation are furnished by    *
 * ANSYS, Inc. or its subsidiaries under a software license    *
 * agreement that contains provisions concerning               *
 * non-disclosure, copying, length and nature of use,          *
 * compliance with exporting laws, warranties, disclaimers,    *
 * limitations of liability, and remedies, and other           *
 * provisions.  The software products and documentation may be *
 * used, disclosed, transferred, or copied only in accordance  *
 * with the terms and conditions of that software license      *
 * agreement.                                                  *
 *                                                             *
 * ANSYS, Inc. is a UL registered                              *
 * ISO 9001:2008 company.                                      *
 *                                                             *
 ***************************************************************
 *                                                             *
 * This product is subject to U.S. laws governing export and   *
 * re-export.                                                  *
 *                                                             *
 * For U.S. Government users, except as specifically granted   *
 * by the ANSYS, Inc. software license agreement, the use,     *
 * duplication, or disclosure by the United States Government  *
 * is subject to restrictions stated in the ANSYS, Inc.        *
 * software license agreement and FAR 12.212 (for non-DOD      *
 * licenses).                                                  *
 *                                                             *
 ***************************************************************
 AFTER YOU HAVE READ, UNDERSTOOD, AND AGREED TO THE PREVIOUS NOTICES,
 PRESS <CR> OR <ENTER> TO CONTINUE
          *****  ANSYS COMMAND LINE ARGUMENTS  *****
  BATCH MODE REQUESTED (-b)    = LIST
  INPUT FILE COPY MODE (-c)    = COPY
    16 PARALLEL CPUS REQUESTED
  DESIGNXPLORER REQUESTED
  INPUT FILE NAME              = /brashear/costa/stdin.1800504
  MEMORY REQUESTED (MB)        = 10000       
  DATABASE SIZE REQUESTED (MB) = 2000        
 PARAMETER STATUS-           (   1 PARAMETERS DEFINED)
 NAME                              VALUE                        TYPE  DIMENSIONS
 MOPT                            incore                          CHARACTER
 00670222          VERSION=LINUX x64       RELEASE= 14.0.3   UP20120322
 CURRENT JOBNAME=file  10:32:24  DEC 10, 2013 CP=      0.288
     0  /verify,bm-8
     0  /verify,off    ! /verify is used by compare to determine the jobname
     0  /title, bm-8, SMP ANSYS Benchmark Test - PCG Structural - Wing Model
     0      
     0  /COM    ANALYSIS TYPE: STATIC, STRUCTURAL   
     0  /COM    SOLVER CHOICE: PCG  
     0      
     0  /debug,stat 
     0      
     0  /nopr   
     0      
     0  dofs   = 5  
     0  eltype = 45 
     0  np     = 1  
     0      
     0  ! define parameters 
     0  aspect=1.0  
     0  level=1 
     0  dof_nd=3
     0  ndofs=dofs*1000000  
     0      
     0  *if,ndofs,lt,50001,then 
     0  a_size=.1   
     0  *elseif,ndofs,lt,100001,then
     0  a_size=.075 
     0  *elseif,ndofs,lt,350001,then
     0  a_size=.050 
     0  *elseif,ndofs,lt,2000001,then   
     0  a_size=.030 
     0  *elseif,ndofs,lt,7500001,then   
     0  a_size=.015 
     0  *else   
     0  a_size=.010 
     0  *endif  
     0      
     0  /PREP7  
     0  shpp,off
     0  ET,1,PLANE42               ! Define PLANE42 as element type 1   
     0  ET,2,eltype                ! Define SOLID95 as element type 2   
     0  *if,eltype,eq,95,then   
     0    KEYOPT,2,11,1 
     0  *endif  
     0  MP,EX,1,38000   
     0  MP,DENS,1,1.033E-3  
     0  MP,NUXY,1,.3
     0  K,1                        ! Define keypoint 1 at 0,0,0 
     0  K,2,2                      ! Define keypoint 2 at 2,0,0 
     0  K,3,2.3,.2                 ! Define keypoint 3 at 2.3,.2,0  
     0  K,4,1.9,.45                ! Define keypoint 4 at 1.9,.45,0 
     0  K,5,1,.25                  ! Define keypoint 5 at 1,.25,0   
     0  LSTR,1,2                   ! Create a straight line between keypoints 1 and 2   
     0  LSTR,5,1                   ! Create a straight line between keypoints 5 and 1   
     0  BSPLIN,2,3,4,5,,,-1,,,-1,-.25   ! Create a B-spline 
     0  AL,1,3,2
     0  ESIZE,a_size
     0  AMESH,1 
     0      
     0  *get,a_nodes,node,,count
     0  *if,eltype,eq,95,then   
     0    zdiv=ndofs/(11*a_nodes) - 1   
     0  *else   
     0    zdiv=ndofs/(3*a_nodes) - 1
     0  *endif  
     0  zlth=a_size*zdiv*aspect 
     0  zdiv=nint(zdiv) 
     0  esiz,,zdiv  
     0  *if,zlth,le,0,then  
     0  zlth=1  
     0  *endif  
     0      
     0  TYPE,2  
     0  VEXT,ALL,,,,,zlth   
     0  modmsh,detach   
     0  emid,add,all
     0  allsel,all  
     0  FINI
     0      
     0  /SOLU   
     0  ESEL,U,TYPE,,1        ! Unselect element type 1 
     0  NSEL,S,LOC,Z,0        ! apply zero B.C.s to one end of wing 
     0  D,ALL,ALL   
     0  NSEL,ALL
     0      
     0  ANTYPE,STATIC   
     0  NSEL,S,LOC,Z,zlth        ! apply a small displacement to opposite end of wing   
     0  d,all,uy,-0.1   
     0  NSEL,ALL
     0  eqsl,pcg
     0  pcgopt,1
     0  outres,all,none 
     0  outres,nsol,last
     0  outres,rsol,last
     0  solve,,,,,nocheck   
     0  fini
     0      
     0  *list,,PCS  
     0      
     0  /exit,nosave
     0      
 RUN SETUP PROCEDURE FROM FILE= /usr/local/packages/ansys/14.0/v140/ansys/apdl/start140.ans
 /INPUT FILE= /usr/local/packages/ansys/14.0/v140/ansys/apdl/start140.ans  LINE=       0
 *** VERIFICATION RUN - CASE bm-8                             ***  OPTION=  4
 *** VERIFICATION RUN - CASE off                              ***  OPTION=  0
 TITLE= 
  bm-8, SMP ANSYS Benchmark Test - PCG Structural - Wing Model                 
    ANALYSIS TYPE: STATIC, STRUCTURAL
    SOLVER CHOICE: PCG
 *** WARNING ***                         CP =       0.312   TIME= 10:32:24
 The /DEBUG,STAT command logic will be removed in a future release.      
 Please use the /PERF command instead.                                   
 *****/DEBUG,STAT statistics tracking key =  1
1
 ***** ANSYS - ENGINEERING ANALYSIS SYSTEM  RELEASE 14.0.3   *****
 ANSYS Academic Research                           
 00670222          VERSION=LINUX x64     10:32:24  DEC 10, 2013 CP=      0.316
  bm-8, SMP ANSYS Benchmark Test - PCG Structural - Wing Model                 
          ***** ANSYS ANALYSIS DEFINITION (PREP7) *****
 *** WARNING ***                         CP =       0.316   TIME= 10:32:24
 Deactivation of element shape checking is not recommended.              
 *** WARNING ***                         CP =       1.452   TIME= 10:32:25
 The mesh of area 1 contains PLANE42 triangles, which are much too stiff 
 in bending.  Use quadratic (6- or 8-node) elements if possible.         
 *** WARNING ***                         CP =      17.809   TIME= 10:32:41
 The mesh of volume 1 contains SOLID45 degenerate elements, which can be 
 much less accurate than hexahedra (bricks).  Use quadratic elements if  
 possible.                                                               
 *** WARNING ***                         CP =      17.813   TIME= 10:32:41
 CLEAR, SELECT, and MESH boundary condition commands are not possible    
 after MODMSH.                                                           
 ***** ROUTINE COMPLETED *****  CP =        23.089
 *****  ANSYS SOLUTION ROUTINE  *****
 *****  ANSYS SOLVE    COMMAND  *****
 *** WARNING ***                         CP =      24.762   TIME= 10:32:42
 Suppression of model checking is not recommended.                       
1
 ***** ANSYS - ENGINEERING ANALYSIS SYSTEM  RELEASE 14.0.3   *****
 ANSYS Academic Research                           
 00670222          VERSION=LINUX x64     10:32:42  DEC 10, 2013 CP=     24.810
  bm-8, SMP ANSYS Benchmark Test - PCG Structural - Wing Model                 
 *** WARNING ***                         CP =      27.234   TIME= 10:32:43
 Out of the 1576260 defined elements, only 1573480 elements are          
 selected.                                                               
 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           
            **** CENTER OF MASS, MASS, AND MASS MOMENTS OF INERTIA ****
  CALCULATIONS ASSUME ELEMENT MASS AT ELEMENT CENTROID
  TOTAL MASS =  0.52661E-02
                           MOM. OF INERTIA         MOM. OF INERTIA
  CENTER OF MASS            ABOUT ORIGIN        ABOUT CENTER OF MASS
  XC =   1.4541          IXX =   0.1265          IXX =   0.3165E-01
  YC =  0.17537          IYY =   0.1388          IYY =   0.3298E-01
  ZC =   4.2413          IZZ =   0.1277E-01      IZZ =   0.1473E-02
                         IXY =  -0.1483E-02      IXY =  -0.1402E-03
                         IYZ =  -0.3917E-02      IYZ =  -0.2495E-14
                         IZX =  -0.3248E-01      IZX =   0.2554E-13
  *** MASS SUMMARY BY ELEMENT TYPE ***
  TYPE      MASS
     2  0.526613E-02
 Range of element maximum matrix coefficients in global coordinates
 Maximum = 1026.51235 at element 1576172.                                
 Minimum = 117.033267 at element 419922.                                 
   *** ELEMENT MATRIX FORMULATION TIMES
  TYPE  NUMBER   ENAME      TOTAL CP  AVE CP
     2 1573480  SOLID45   16684.232   0.010603
 Time at end of element matrix formulation CP = 1121.26208.              
 PRECONDITIONED SOLVER CP TIME      =  3580.200
 PRECONDITIONED SOLVER ELAPSED TIME =   267.141
   *** ELEMENT RESULT CALCULATION TIMES
  TYPE  NUMBER   ENAME      TOTAL CP  AVE CP
     2 1573480  SOLID45     173.806   0.000110
   *** NODAL LOAD CALCULATION TIMES
  TYPE  NUMBER   ENAME      TOTAL CP  AVE CP
     2 1573480  SOLID45       0.761   0.000000
 *** LOAD STEP     1   SUBSTEP     1  COMPLETED.    CUM ITER =      1
 *** TIME =   1.00000         TIME INC =   1.00000      NEW TRIANG MATRIX
 *** ANSYS BINARY FILE STATISTICS
  BUFFER SIZE USED= 16384
     5372.375 MB WRITTEN ON ELEMENT SAVED DATA FILE: file.esav
      388.062 MB WRITTEN ON RESULTS FILE: file.rst
 FINISH SOLUTION PROCESSING
 ***** ROUTINE COMPLETED *****  CP =      4796.572
  LISTING OF THE DATA ON FILE file.PCS
 ******************************************************************************
 (C) Copyright 1992-2004
 Computational Applications and System Integration Inc.
 All rights Reserved.
 ******************************************************************************
  
 Job:file	at:Tue Dec 10 10:38:51 2013
  
  
 	Number of cores used (Shared Memory Parallel): 16
 	Degrees of Freedom: 5004342
 	DOF Constraints: 17652
 	Elements: 1573480
 		Assembled: 1573480
 		Implicit: 0
 	Nodes: 1668114
 	Number of Load Cases: 1
  
 	Nonzeros in Upper Triangular part of
 	             Global Stiffness Matrix : 197401257
 	Nonzeros in Preconditioner: 64227360
 		*** Precond Reorder: MLD ***
 		Nonzeros in V: 48419064
 		Nonzeros in factor: 5799612
 		Equations in factor: 33000
 	*** Level of Difficulty: 1   (internal 0) ***
  
 	Total Operation Count: 5.66901e+11
 	Total Iterations In PCG: 510
 	Average Iterations Per Load Case:  510.0
 	Input PCG Error Tolerance: 1e-08
 	Achieved PCG Error Tolerance: 9.73981e-09
  
  
 	DETAILS OF PCG SOLVER SETUP TIME(secs)        Cpu        Wall
 	     Gather Finite Element Data              1.83        1.82
 	     Element Matrix Assembly              3566.06      264.05
  
 	DETAILS OF PCG SOLVER SOLUTION TIME(secs)     Cpu        Wall
 	     Preconditioner Construction            31.03       32.90
 	     Preconditioner Factoring                0.99        1.00
 	     Apply Boundary Conditions               9.46       10.34
 	     Preconditioned CG Iterations         3535.67      221.16
 	          Multiply With A                 1812.94      113.42
 	               Multiply With A22          1812.70      113.42
 	          Solve With Precond              1545.30       96.66
 	               Solve With Bd               139.87        8.76
 	               Multiply With V            1314.59       82.30
 	               Direct Solve                 49.42        3.09
 ******************************************************************************
 	     TOTAL PCG SOLVER SOLUTION CP TIME      =  3579.91 secs
 	     TOTAL PCG SOLVER SOLUTION ELAPSED TIME =   267.11 secs
 ******************************************************************************
 	Total Memory Usage at CG         :  6966.77 MB
 	PCG Memory Usage at CG           :  3941.54 MB
 	Memory Usage for Matrix          :  2138.08 MB
 ******************************************************************************
 	Multiply with A Memory Bandwidth :    65.30 GB/s
 	Multiply with A MFLOP Rate       :  3505.52 MFlops
 	Solve With Precond MFLOP Rate    :  1391.77 MFlops
 	Precond Factoring MFLOP Rate     :     0.00 MFlops
 ******************************************************************************
 	Total amount of I/O read         :  5778.02 MB
 	Total amount of I/O written      :  4976.54 MB
 ******************************************************************************
  
 EXIT ANSYS WITHOUT SAVING DATABASE
 NUMBER OF WARNING MESSAGES ENCOUNTERED=          7
 NUMBER OF ERROR   MESSAGES ENCOUNTERED=          0
+--------------------- A N S Y S   S T A T I S T I C S ------------------------+
Release: 14.0.3     Build: UP20120322   Platform: LINUX x64   
Date Run: 12/10/2013   Time: 10:39
Compiler: Intel(R) FORTRAN Compiler Version 11.1.0  (Build: 20100203)
          Intel(R) C/C++ Compiler Version 11.1.0  (Build: 20100203)
          Intel(R) Math Kernel Library Version 10.3.3 Product Build 20110314
Number of cores:  16 (Shared Memory Parallel)
GPU Acceleration: Not Requested
Job Name: file
Input File: stdin.1800504
Working Directory: /brashear/costa
Elapsed time spent pre-processing model (/PREP7)  :     18.8 seconds
Elapsed time spent solution - preprocessing       :     18.7 seconds
Elapsed time spent computing solution             :    370.0 seconds
Elapsed time spent solution - postprocessing      :      0.0 seconds
Elapsed time spent post-processing model (/POST1) :      0.0 seconds
Equation solver computational rate                :   3505.5 Mflops
Maximum total memory used                         :   7174.0 Mbytes
Maximum total memory allocated                    :  10000.0 Mbytes
--- M O D E L   S U M M A R Y --------------------------------------------------
Title:  bm-8, SMP ANSYS Benchmark Test - PCG Structural - Wing Model
            Number
Elements   1573480
   Nodes   1668114
    DOFs   5004342
Element
  Type   Number
   42      2780
   45   1573480
--- S O L U T I O N   S U M M A R Y --------------------------------------------
Analysis Type: Static (Steady-State)
                Number
   Load Steps        1
     SubSteps        1
   Iterations        1
--- R U N   S T A T I S T I C S ------------------------------------------------
       [Note: Time in seconds,  Data in megabytes]
               Prep7  Solution     Post1     Total
 No. Trips         1         1         0         1
 Wall Time      18.8      392.      0.00      413.    
  CPU Time      22.8     4.773E+03  0.00     4.797E+03
    Memory       ---       ---       ---     7.174E+03
--- S O L U T I O N   S T A T I S T I C S --------------------------------------
            TotSolve
 No. Trips         1
 Wall Time      370.    
  CPU Time     4.726E+03
               Check  DomOrder   Objects Form&Assm    Solver    Output
 No. Trips         1         1         2         1         1         1
 Wall Time      1.69     0.906      16.1      77.2      277.      11.3    
  CPU Time      6.60      9.41      25.6     1.059E+03 3.589E+03  73.7    
--- S O L V E R   S T A T I S T I C S ------------------------------------------
Solver: PCG                  (LOD = 1)
Percent MSAVE:   0%   Tolerance: 1.00000E-08
Total PCG Iterations:     510     Ave:   510     Max:     510
Solver Computation Rate:   3505.5 MFLOPS
              Gather  Assemble  Pre-Cond       A*x     Solve
 No. Trips         1         2         1       512       511
 Wall Time      2.51      16.0      35.5      113.      96.6    
  CPU Time      2.50      14.8      33.6     1.813E+03 1.545E+03
+------------------ E N D   A N S Y S   S T A T I S T I C S -------------------+
 *---------------------------------------------------------------------------*
 |                                                                           |
 |                            ANSYS RUN COMPLETED                            |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 |            Release 14.0.3         UP20120322         LINUX x64            |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 | Database Requested(-db)  2000 MB    Scratch Memory Requested      7996 MB |
 | Maximum Database Used    1340 MB    Maximum Scratch Memory Used   5171 MB |
 |                                                                           |
 |---------------------------------------------------------------------------|
 |                                                                           |
 |        CP Time      (sec) =       4797.136       Time  =  10:39:15        |
 |        Elapsed Time (sec) =        413.000       Date  =  12/10/2013      |
 |                                                                           |
 *---------------------------------------------------------------------------*
unset echo